2025 John Deere 72D

2025 John Deere 72D

Easy drive-over mower deck installation

Compatible with rear 3-point hitch attachments, backhoes, and loaders so you can keep these implements attached while mowing

Simple, one pin, height-of-cut adjustment

Mid-power take-off (PTO) driven

Features may include:

The hydraulic independent lift system-of-cut system allows the mower to be raised and lowered independently of the rear implements. It can use either the dual selective control valve (SCV) (loader joystick).

The forward lift link is installed on the deck. It is spring loaded, allowing the link to connect automatically to front hangers (installed on tractor).

The PTO-drive shaft design allows the shaft to automatically adjust as the female end of the PTO coupler engage with the male end of the gearbox coupler. The male end coupler has tapered guides to ensure engagement of both ends.

The 2032R and 2038R tractors feature a newly designed, CommandCut™ mower deck lift system, which allows quick and accurate adjustments of the mower deck with the turn of a dial and the bump of a lever. Control callouts make operation simple and repeatable. The height of cut setting dial and raise/lower lever are conveniently located on the right-hand console and easily accessible by the operator. Some of the key benefits of this system are:

Installing CommandCut™ only requires a simple calibration after installation. It is a true “plug-and-play” system as no controller programming is required.

Inhibits PTO operation when mower deck is in the install position to prevent PTO driveling and mower deck blade damage

Eliminates the need for hydraulic power and components, thus dedicating all hydraulic capacity to other implements or tract functions

Fewer hydraulic components means fewer hydraulic leaks, especially when working on sensitive turf

Precise height of cut with no drift or leakdown

System can be calibrated to different tire sizes to maintain precision

AutoConnect™ Decks are compatible with rear 3-point hitch attachments, backhoes, loaders, and a front hitch. The operator can keep these extra implements attached to the tractor while mowing, if desired.

For use with a front 3-point hitch and an old 154.4-cm (60-in.) or 182.9-cm (72-in.) 7-Iron™ Mid-Mount Mower on 3033R-3046R and 3120-3720 Tractors, LVB24810 front 3-point hitch/mid-mount mower draft arms are required.