Enns Brothers

  • McGillivray @ the Perimeter
  • , MB R2J0V1
  • Call Us: (204) 895-0212
  • http://www.ennsbrothers.com/
Print This Page

2018 John Deere X590, 54-in. Deck

Selling Price -

$13,900.00

Pre-Owned X590 Lawn Tractor with 54" Mower, Bagger Kit, 47" Snow Blower, Low Hours! Located in Oak Bluff - call 204-895-0212 for details!

Information

2018 John Deere X590, 54-in. Deck

Features may include:
  • 54-in. Accel Deep™ Deck
  • Excellent power and performance
  • Constant-speed governor technology
  • 4-year/500-hour bumper-to-bumper warranty

Photos

Highlights

  • $13,900.00
  • Oak Bluff
  • Pre-Owned
  • In Stock
  • E335687A
  • 2018
  • John Deere
  • X590, 54-in. Deck
  • Model: FS730 EFI
  • 25
  • 95
  • Gas
  • Available
  • With mower: 68.4 in. (174 cm) | With mower (deflector raised for storage): 59.4 in. (151 cm) | Without mower: 41 in. (104.1 cm)
  • 52.25 in. (132.7 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • 54
  • Stamped

Specifications

  • 2018
  • John Deere
  • X590, 54-in. Deck
  • Base
  • Riding
  • Model: FS730 EFI
  • Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
  • 25.5 hp (19 kW)
  • 44.3 cu in. (726 cc)
  • V-twin, cast-iron liners
  • Constant-speed electronic
  • No choke required
  • Air
  • Dry, replaceable with foam precleaner
  • Transaxle: replaceable
  • Gasoline
  • Delivery: Open-loop electronic fuel injection (EFI)
  • Gauge on dash
  • Power, hydraulic
  • Mower: Electric power take-off (PTO) clutch, in-line belt
  • Standard
  • Fuel tank location: Rear | Hourmeter | Reflectors | 12-V outlet | Cruise Control: button on dash | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Weight bracket: Standard front and rear - each holds up to four Quik-Tatch weights, 42 lb (19 kg) | Floor mats: Sure-grip rubber | Storage: under seat and covered toolbox | Service interval decal | Handles | Cup holder | Tilt steering wheel: Standard, five position | Preset cut height | Mower deck type: Side discharge | Mower wash port
  • Internal wet disc
  • Welded heavy-duty
  • Cast iron front axle, front wheel ball bearings
  • 16x6.5-8 turf
  • 24x12-12 HDAP
  • Mower: Four
  • Engine: Solenoid shift
  • Flywheel alternator, regulated, 15 amp
  • 12 V (500 CCA)
  • Transaxle Forward speed: 0-7.2 mph (0-11.6 km/h) | Transaxle Reverse speed: 0-5.2 mph (0-8.4 km/h)
  • Fuel fill opening, On left fender: 3 in. (7.6 cm) | Steering, Uncut circle radius: 24 in. (61 cm)
  • 79 in. (201 cm)
  • 52.25 in. (132.7 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • With mower: 68.4 in. (174 cm) | With mower (deflector raised for storage): 59.4 in. (151 cm) | Without mower: 41 in. (104.1 cm)
  • 51.2 in. (130 cm)
  • 54 in. (137 cm)
  • Steering: 22 in. (55.9 cm)
  • Back: 21 in. (53.3 cm)
  • Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm)
  • 14 in. (35.6 cm)
  • Tank: 4.4 U.S. gal. (16.7 L)
  • Mower, no fuel: 805 lb (365 kg)
  • Two standard, incandescent, 27 W
  • Meets ANSI standard | Meets OPEI standard | Safety video
  • High-back | Suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
  • Type: Hydraulic
  • Hood: Molded-in color hood material reduces sound, will not rust or dent
  • Fender: Stamped steel | Mower: Stamped steel deck shell, 10 gauge 0.135 in. (3.4 mm)
  • Bushings: Metal, replaceable
  • 54
  • Stamped