S140 Lawn Tractor with 48" Deck, Electric PTO
Information
2024 John Deere 100 Series S140
Features may include:- 22 hp (16.4 kW) V-Twin Engine
- Electric PTO, Hydrostatic Transmission w/side-by-side pedals
- Operator station is wide and comfortable
- 15-in Open-Back seat and standard front bumper
- 2 year/120 hour bumper-to-bumper warranty
- Engine is powerful and smooth-running V-twin design
- Frame made of full-length welded steel for reliability
- Snow removal is a strength of lawn tractors
- Hydrostatic transmission gives an infinite choice of ground speeds
- Operator station designed for operator comfort and convenience
- Instruments and controls are easy to find and convenient to use
- Serviceability is convenient with an easy-open hood
- Help maintain your mower and lawn with the MowerPlus™ app and connector
- The Edge™ cutting system gives superior performance
- Two-year or 120-hour bumper-to-bumper warranty is included
Photos
Highlights
- $4,731.00
- On Order
- New
- On Order
- 2025
- John Deere
- 100 Series S140
- V-Twin
- 22 HP
- mounting: CargO Mount™ system
- Gas
- Available
- with mower: 1544 mm (60.8 in.) | with mower (deflector raised for storage): 1313 mm (51.7 in.) | without mower: 996 mm (39.2 in.)
- Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1118 mm (44 in.)
- 2WD
- 48
- Stamped
Specifications
- 2025
- John Deere
- 100 Series
- S140
- Riding
- Model: 44N677 (M44) | Overhead valve, full-pressure lube, oil filter
- 16.4 kW (22 hp)
- 724 cm (44.2 cu in.)
- V-twin
- method: Air
- Cartridge
- Bendix type
- delivery: Pulse pump and carburetor
- Gasoline
- Mechanical, viewable from seat
- Transaxle: Hydrostatic, 2-wheel drive
- Mechanical
- Single lever with spring-return on choke
- Sector and pinion with single drag link and tie rod
- Mower: Electric power take-off (PTO) clutch | Mower attachability: Single belt
- Internal wet disk
- 12 V / 300 CCA
- Regulated, 8 amp
- 20x8-8
- 15x6-6
- Mower: Four
- Forward: 0-8.9 km/h (0-5.5 mph) | Reverse: 0-5.2 km/h (0-3.2 mph)
- mounting: CargO Mount™ system
- Full-length welded steel
- Two standard, incandescent
- Backup protection: Reverse Implement Option (RIO)
- Fuel fill opening Center: 4.45 cm (1.75 in.) | Steering wheel, diameter: 30.5 cm (12 in.) | Fore-aft adjustment - While seated: 14 cm (5.5 in.) | Mower deck material: 2.7 mm (0.105 in.)
- Edge™ mower deck: 122 cm (48 in.)
- 45.7 cm (18 in.) | Uncut circle: 50.8 cm (20 in.)
- back: 38 cm (15 in.)
- Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1118 mm (44 in.)
- 1770 mm (69.7 in.)
- 1242 mm (48.9 in.)
- with mower: 1544 mm (60.8 in.) | with mower (deflector raised for storage): 1313 mm (51.7 in.) | without mower: 996 mm (39.2 in.)
- tank: 9.1 L (2.4 U.S. gal.)
- Maximum: 227 kg (500 lb)
- 212 kg (468 lb)
- Transaxle type: TLT200 hydrostatic, two-wheel drive | Transaxle control: Side-by-side pedals | Fuel tank location: Rear | Transaxle: Side-by-side pedals | Primer/paint: E-coat/powder | Floor mats: Yes, with debris removing channels | Storage: tray with optional cover | Mower deck: Side discharge | Mower attachability: Slide under tractor | Front draft arms: One spring clip | Rear draft arms: Two spring clips
- change: No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Yes, not serviceable
- system type: Spring-assisted hand-grip lever
- Front axle: Cast-iron front axle, powdered-metal front wheel bushings | Hood material: Molded-in color material reduces sound, will not rust or dent
- Fender deck: Stamped steel | Mower deck: Stamped steel deck shell | Mower: Steel, 12 gauge
- Two piece with open-back | suspension: Tilt, two coil springs
- Mower adjustment: One bolt | Mower level adjustment: Easy-level deck
- 2 year/120 hour bumper-to-bumper
- 2WD
- 48
- Stamped