2025 John Deere 100 Series S110

Selling Price -

$4,316.00

S110 Lawn Tractor with 42" Deck

Information

2023 John Deere S110

Lawn Tractor
  • 19 HP engine
  • Deep deck design helps lift grass for a superior cut
  • Redesigned deck lift lever raises and lowers deck easily
  • Operator station is wide and comfortable
  • Powerful battery helps with starts, even after lengthy storage

Features may include:

Powerful engine features full-pressure lubrication for long life

A 19-hp (14.2-kW) single-cylinder engine has plenty of power and torque to handle tough mulching, mowing, and bagging conditions:

  • Electronic ignition for fast starts
  • Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
  • Cast-iron cylinder liner for long engine life
  • Overhead valves for excellent power and fuel economy
  • Anti-vibration system
  • Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
  • More effective when operating the tractor on an incline
  • Large fuel filter for trouble-free operation

No-tools oil drain valve is easy to access when changing engine oil.

Frame made of full-length welded steel for reliability

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

  • Full-length, robotically-welded frame design has high-strength steel rails for added strength and long life.
  • One-piece, steel fender deck is bolted to the frame.
Cast-iron front axle will not bend

The front axle is constructed of solid cast iron that will not bend:

  • Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
  • Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
  • Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.
Hydrostatic transmission gives an infinite choice of ground speeds

A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:

  • Automotive-type accelerator controls ensure easy operation.
  • Operator can change direction without lifting foot off the platform.
  • Large pedal surface gives superior operator comfort.

Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:

  • Tuff Torq TLT200A - E110, E120, E130
  • Tuff Torq TLT200B - E140, E150, E160
  • Tuff Torq K46AC - E170, E180
Operator station designed for operator comfort and convenience

The operator station is designed for operator comfort and easy operation:

  • Controls are positioned where they are easy to reach and use to control the tractor.
  • The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
  • The seat is tilted back at the optimum angle to provide the most comfortable operator position.

Controls are easy to see and use:

  • Large, three-spoke steering wheel for greater operator comfort and control
  • Ignition switch is on the dash for starting ease

Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:

  • Optimum operator comfort

Photos

Highlights

  • $4,316.00
  • In Stock
  • New
  • In Stock
  • 2025
  • John Deere
  • 100 Series S110
  • Single Cylinder
  • 19 HP
  • mounting: CargO Mount™ system
  • Gas
  • Available
  • with mower: 140.2 mm (55.2 in.) | with mower (deflector raised for storage): 118.1 mm (46.5 in.) | without mower: 996 mm (39.2 in.)
  • Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 112 mm (44 in.)
  • 2WD
  • 42
  • Stamped

Specifications

  • 2025
  • John Deere
  • 100 Series
  • S110
  • Riding
  • Model: 33R877 (M33) | Overhead valve, full-pressure lube, oil filter
  • 14.2 kW (19 hp)
  • 540 cc (33 cu in.)
  • One
  • method: Air
  • Cartridge
  • Bendix type
  • delivery: Pulse pump and carburetor
  • Gasoline
  • Mechanical, viewable from seat
  • Transaxle: Hydrostatic, 2-wheel drive
  • Mechanical
  • Single lever with spring-return on choke
  • Sector and pinion with single drag link and tie rod
  • Mower: Manual power take-off (PTO) | Mower attachability: Single belt
  • Internal wet disk
  • 12 V / 300 CCA
  • Regulated, 8 amp
  • 20x8-8
  • 15x6-6
  • Mower: Two
  • Forward: 0-8.9 km/h (0-5.5 mph) | Reverse: 0-5.2 km/h (0-3.2 mph)
  • mounting: CargO Mount™ system
  • Full-length welded steel
  • Two standard, incandescent
  • Backup protection: Reverse Implement Option (RIO)
  • Fuel fill opening Center: 4.45 cm (1.75 in.) | Steering wheel , diameter: 12 in. (30.5 cm) | Fore-aft adjustment - While seated: 14 cm (5.5 in.) | Mower deck material: 2.3 mm (0.090 in.)
  • Edge™ mower deck: 107 cm (42 in.)
  • 45.7 cm (18 in.) | Uncut circle: 63.5 cm (25 in.)
  • back: 38 cm (15 in.)
  • Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 112 mm (44 in.)
  • 177 mm (69.7 in.)
  • 124.2 mm (48.9 in.)
  • with mower: 140.2 mm (55.2 in.) | with mower (deflector raised for storage): 118.1 mm (46.5 in.) | without mower: 996 mm (39.2 in.)
  • tank: 9.1 L (2.4 U.S. gal.)
  • Maximum: 227 kg (500 lb)
  • 188 kg (414 lb)
  • Transaxle type: TLT200 hydrostatic, two-wheel drive | Transaxle control: Side-by-side pedals | tank location: Rear | Transaxle: Side-by-side pedals | Primer/paint: E-coat/powder | Floor mats: Yes, with debris removing channels | Mower deck: Side discharge | Mower attachability: Slide under tractor | Front draft arms: One spring clip | Rear draft arms: Two spring clips
  • change: No-tools oil drain with replaceable filter | Oil cooler: Fins and fan on transaxle | filter: Yes, not serviceable
  • system type: Spring-assisted hand-grip lever
  • Front axle: Cast-iron front axle, powdered-metal front wheel bushings | Hood material: Molded-in color material reduces sound, will not rust or dent
  • Fender deck: Stamped steel | Mower: Steel, 13 gauge
  • Two piece with open-back | suspension: Tilt, two coil springs
  • Mower adjustment: One bolt | Mower level adjustment: Easy-level deck
  • 2 year/120 hour bumper-to-bumper
  • 2WD
  • 42
  • Stamped