2020 John Deere Z735E 60 HC

2020 John Deere Z735E 60 HC

Features may include:

Heavy-duty design delivers strength and durability

A strong, welded steel frame provides solid, reliable support for the machine components and operator:

• Heavy-duty 3- x 2-in. (76.2- x 51-mm) frame tubing for durability

• Rear frame provides solid support and protection for the engine

Large front caster wheels provide a smooth ride and level cut:

• A large surface area helps to provide a smooth ride for the operator.

• Pneumatic tires for the smoothest ride (Z720E, Z735E, Z730M, Z735M, Z740R)

• Semi-pneumatic tires for extra reliability and durability (Z740R with Tweel® tire technology)

• Better performance on slopes

• Caster wheels turn easily on two maintenance-free sealed ball bearings for both the spindles and the wheel axles.

• Long, trouble-free life

• Designed to give smooth turns without damage to the turf

Rear tires have high-quality tread and optimum size for superior traction and smooth ride:

• Tire width is optimized for mower deck size.

• 9.5 in. (24 cm) for 48-in. (122-cm) mowers (E, M, R Series)

• 10.5 in. (26.7 cm) for 54-in. (137-cm) and 60-in. (152-cm) mowers (E, M Series)

• Tread pattern is optimized for excellent traction and minimum turf damage.

• Special wheel design gives an enhanced appearance to the machine.

The operator station has been designed for comfort, visibility, and ease of use:

• Operator station provides plenty of room for comfortable operation.

• Flat operator station makes getting on and off easy.

• Step weldment on mower deck is convenient for the operator.

• Controls are located close to the operator for convenience.

• Operator controls are color coded for easy identification and operation.

ZTrak Z700 Series Mowers are equipped with a foldable Roll-Gard rollover protective structure (ROPS) and retractable seat belt:

• They help protect the operator in the event of tip over.

• Easy-fold ROPS improves the ability to store the ZTrak in a garage.

• The ROPS is designed to meet or exceed American Society of Agricultural Engineers (ASAE) safety standards.

• Easy-fold ROPS includes a built-in isolator.

• When the ROPS is up, the overall height is 71.1 in. (182.2 cm) for all models except the Z740R, which is 72.1 in. (183.2 cm).

• When the ROPS is down, the overall height is 47.4 in. (120.3 cm) for E Series, 49.7 in. (126.2 cm) for M Series, and 51 in. (129.5 cm) for R Series.

• To fold, remove the two pins and rotate the top of the Roll-Gard downward.

• The Roll-Gard must be in the upright and locked position when low clearance is not required.

• The ROPS and seat belt are included in base equipment.

• Use of the seat belt is recommended when operating with ROPS in the upright position.

A heavy-duty, permanent step weldment is located at the left front corner of the mower deck:

• Encourages proper entry to the operator station

• Provides a good gripping surface for the operator’s foot